Thermostats with an internal GFCI including the Warmup 4iE and WUDG will fulfill this requirement. If a non-GFCI thermostat like our Tempo thermostat is being used, a GFCI breaker will be required. Consult with your local electrician to make sure your installation is properly protected and meets National and Local Electrical Code.
Installation
Yes, the sensor lead can be extended up to 200 meters using same gauge cable. Total resistance of the sensor cable must not exceed 10 ohms.
If using a DCM-PRO membrane, scrape/scratch and prime the vinyl to ensure bonding with a highly modified thinset and install the membrane directly to it.
In this guide, we will cover various aspects of the installation process, focusing on key recommendations and requirements that will help you make informed decisions and execute the installation with confidence. We will address topics such as conduit usage, local electrical code compliance, routing of cables, and essential considerations to ensure a safe and effective installation.
This post explains how to mount and position your Towel Warmer properly in your space.
This page explains the different circumstances in which you might wire your Towel Warmer to a switch or to a thermostat.
This page explains how to determine which voltage to run to your DCM-PRO heating system.
Outlined description of when to test your DCM-PRO cable and why you should do it.
This page states that Warmup Mirror Defoggers are not recommended for use in showers.
This page outlines the recommended installation methods for your installing your sensor probe.