This page explains the positioning of the factory joint to ensure a successful installation of your Warmup heating system.
Installation
The conductor cores and ground braid of the 10′ cold lead are factory joined in a water resistant joint assembly to each supply conductor and ground conductor of the unheated lead.
The cold tail lead and the sensor probe should be run in separate conduits. This will prevent any interference from the cold tail lead affecting the temperature readings from the sensor probe.
This page explains the DCM-PRO spacing guidelines and recommendations.
This page explains the purpose of testing your self-regulating cables and how to perform these tests.
This is a summary of the recommended installation practices when installing asphalt over a Warmup heated driveway system.
Read this before choosing your gang box. Click “Read More” for important information.
Here you will find some helpful tips for the successful installation of your snow melting controller. Click “Read More” for details.
Take a look at an actual DS2 or DS5 installation example. Click “Read More” for details.
You will need to examine the positioning of moisture sensor of your snow melting controller. Click “Read More” for details.