Video

Specialized installation – under Nailed Hardwood


Floor heating can work under nailed hardwood as well.  Click “Read More” for detailed instructions to do it the right way.

Running Warmup De-Icing Heating Cable in a Downspout


This short video shows how to run Warmup De-Icing Heating Cable in a Downspout.

Programming your COMMBOX-600


The COMMBOX-600 is a “Plug and Play” controlled power distribution panel for frost protection, ice and snow melting projects. When receiving a signal from the sensor(s)m the contactors are activated, energizing your heating system. DIP switch settings determine how the zones activate. When programming your system, make sure DIP switch 1 is in the ON position. The program manual can be navigated by using the SELECT (+) to move forward or SELECT (-) to go back through settings.

How To Secure Roof Clips by Warmup


This short video by Warmup shows how to secure roof clips.

How to repair an electric floor heating cable system


Here is an instruction sheet that will guide you through the repair process of a damaged heating system wire.

Heat Tracing Cable Installation Video


Click here to view a Product Review and Installation Video of Warmup anti-freezing pipe system by A Concord Carpenter.

Foil Floor Heating Installation video


See for yourself how easy installing our foil heating systems are.  Click here for the installation video.

Floor Probe Installation Instructions


The thermostats come with a 9’ sensor cable to detect the temperature under the floor finish. The end of the probe wire contains a capped sensor that should be evenly centered between two heating cables at least 12” into the heated area. At no time should the probe wire cross the heating cable.

Electric Floor Heating Mat Installation Video


Warmup electric floor heating mats are designed to make installation easy. Take a peek at our brief installation video to see for yourself.  Click here to view it. To view a demonstration, watch our video on heating mat installation below.

Scroll to Top